Tri Toolkit
Calculators › Race pacing planner

How hard should I ride the bike in my 70.3 or Ironman?

Target watts for a 70.3 or Ironman bike, and whether your plan leaves a run. source checked v0.1

Your race and your power

Example numbers. Save your FTP on the zones page and it fills in here.
Not sure? Use the finish-time predictor.
Target power for the bike
–

On the day

    How this works

    Where the ranges come from
    IF = normalized power ÷ FTP · target watts = FTP × IF · TSS = bike hours × IF² × 100
    RaceIntensity factorSource
    70.3, age group0.80–0.85TrainingPeaks coach Q&A, "How to pace your half Ironman bike" (2014, updated 2022)
    Ironman, age group0.65–0.75 (first Ironman: 0.65)TrainingPeaks, "Lessons from Kona: how to nail an Ironman bike"; Best Bike Split (2026)
    Ironman, professionalsabout 0.78–0.82TrainingPeaks, "Lessons from Kona"

    For a full Ironman we also check Training Stress Score. Coach Rick Ashburn's chart (2008), reproduced by Best Bike Split, marks 250–285 TSS as the good range for most well-prepared age-groupers, and higher values as a risk for the run. If your bike time is long, we lower the target so TSS stays inside that range. Coaching practice

    These ranges come from coaches and power-file analysis, not controlled trials. The same source warns that hot, hilly courses and weaker running call for the lower end. Your FTP must be current: an FTP that is too high makes every number here too high.

    Calculator version 0.1. Found a mistake or a better source? Tell us on the How we work page.